Rear Hugger matt carbon Ducati Multistrada V4RS 2024+
Rear Hugger matt carbon
Art.no: KHO.101.PP22M.K
Manufacturer: Ilmberger CarbonParts
A clear and thorough installation guide is supplied with this carbon part.
Bolted to the original attachment points, the rear fender made of carbon has proven itself in all situations. It protects the rider and motorcycle much better from the dirt coming from the rear wheel. The exposed chain guard was also lengthened in its construction compared to the original part. This means that unwanted stains - by a well-lubricated chain - on bike and rider are a thing of the past.
But not only technically, but also optically, the rear fender can utilize its full potential.
Installed in just a few minutes, the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture, the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more overwhelming the result.
For our carbon we only use prepreg fabric specially produced for this purpose, which is also used in a similar form in Formula 1 and space travel. The material, which is elaborately hand-laminated and cured in several stages in the autoclave, not only impresses with its unique appearance but also with its unique technical properties. With the same volume, it has a specific stiffness three times as high as steel and at the same time, due to its particularly low density, only a fraction of its weight.
In order to optimally protect this high-quality material from all kinds of environmental influences, we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect, which allows the high quality of the material to come into its own.
So that not only driving but also screwing is a pleasure, we only use the original fastening points for this part.
Why choose carbon?
Carbon is a great material in terms of esthetics, through its high-tech look. It gives your bike an exclusive and sporty appearance, if you choose quality carbon like Ilmberger carbon. Besides being beautiful in appearance, Ilmberger carbon saves up to 70% in weight when compared to the OEM part.
Why you should choose Ilmberger carbon:
Carbon is available in a wide range of qualities, but only Ilmberger carbon is of the highest quality, with the best possible finish.
So what makes Ilmberger carbon so special:
Not only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from Prepreg carbon weave. The carbon fibre is processed dry and usually laid in fully milled aluminium moulds, then packed in vacuum bags. In the next step, the parts are kept under constant vacuum within the bag and exposed to additional external pressure while being baked in the autoclave for several hours. In addition, the temperature is raised or lowered several times, depending on which fibres are being treated. Following the heating process, the parts are de-moulded and milled and sharpened in the water jet cutter or the 5 axle milling machine. Then, in the final step, the practically finished carbon parts are covered with a clear plastic coating. Extra attention to small details:What really sets Ilmberger apart is the minute attention to the smallest details. The carbon fibre follows the lines of the part, adding that extra touch, which makes the difference between 'just any carbon fiber part' and the perfect quality of Ilmberger. The seams between different carbon fiber panels are nearly invisible and are placed in inconspicuous corners of the part, to ensure the part stands out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which ensures that your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we guarantee a no-hassle-return policy on part fitment.
Carbon clear-coat
Ilmberger only uses a special high-tech coating to finish its products with. All parts are provided with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visually and technically superior over all conventional clearcoats. With regard to their protective effect it plays in a league of its own: Even after extensive testing under the toughest test conditions in the laboratory the plastic coating shines like new ? it has been TUV-certified for its resistance to aging, weathering and UV resistance.
Quality is Ilmberger CarbonParts' no. 1 priority.
Rear Hugger matt carbon
Art.no: KHO.101.PP22M.K
Manufacturer: Ilmberger CarbonParts
A clear and thorough installation guide is supplied with this carbon part.
Bolted to the original attachment points, the rear fender made of carbon has proven itself in all situations. It protects the rider and motorcycle much better from the dirt coming from the rear wheel. The exposed chain guard was also lengthened in its construction compared to the original part. This means that unwanted stains - by a well-lubricated chain - on bike and rider are a thing of the past.
But not only technically, but also optically, the rear fender can utilize its full potential.
Installed in just a few minutes, the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture, the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more overwhelming the result.
For our carbon we only use prepreg fabric specially produced for this purpose, which is also used in a similar form in Formula 1 and space travel. The material, which is elaborately hand-laminated and cured in several stages in the autoclave, not only impresses with its unique appearance but also with its unique technical properties. With the same volume, it has a specific stiffness three times as high as steel and at the same time, due to its particularly low density, only a fraction of its weight.
In order to optimally protect this high-quality material from all kinds of environmental influences, we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect, which allows the high quality of the material to come into its own.
So that not only driving but also screwing is a pleasure, we only use the original fastening points for this part.
Why choose carbon?
Carbon is a great material in terms of esthetics, through its high-tech look. It gives your bike an exclusive and sporty appearance, if you choose quality carbon like Ilmberger carbon. Besides being beautiful in appearance, Ilmberger carbon saves up to 70% in weight when compared to the OEM part.
Why you should choose Ilmberger carbon:
Carbon is available in a wide range of qualities, but only Ilmberger carbon is of the highest quality, with the best possible finish.
So what makes Ilmberger carbon so special:
Not only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from Prepreg carbon weave. The carbon fibre is processed dry and usually laid in fully milled aluminium moulds, then packed in vacuum bags. In the next step, the parts are kept under constant vacuum within the bag and exposed to additional external pressure while being baked in the autoclave for several hours. In addition, the temperature is raised or lowered several times, depending on which fibres are being treated. Following the heating process, the parts are de-moulded and milled and sharpened in the water jet cutter or the 5 axle milling machine. Then, in the final step, the practically finished carbon parts are covered with a clear plastic coating. Extra attention to small details:What really sets Ilmberger apart is the minute attention to the smallest details. The carbon fibre follows the lines of the part, adding that extra touch, which makes the difference between 'just any carbon fiber part' and the perfect quality of Ilmberger. The seams between different carbon fiber panels are nearly invisible and are placed in inconspicuous corners of the part, to ensure the part stands out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which ensures that your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we guarantee a no-hassle-return policy on part fitment.
Carbon clear-coat
Ilmberger only uses a special high-tech coating to finish its products with. All parts are provided with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visually and technically superior over all conventional clearcoats. With regard to their protective effect it plays in a league of its own: Even after extensive testing under the toughest test conditions in the laboratory the plastic coating shines like new ? it has been TUV-certified for its resistance to aging, weathering and UV resistance.
Quality is Ilmberger CarbonParts' no. 1 priority.
