Clutch slave cylinder

In stock

New product

€ 122,00 tax incl.
€ 122,00 excl. tax - for non-EU-Customers

By buying this product you can collect up to 244 loyalty points. Your cart will total 244 points that can be converted into a voucher of € 5,61.

CNC Racing has initially built its brand starting with their clutch slave cylinders. They are unrivalled in their combination of mechanical excellence and their affordable price. We tested their clutch slave cylinders for months before starting with the brand as a whole, and we were never disappointed. They do offer a 30% to 40% lower clutch effort, and bleeding the slave cylinder is easy and quickly done.
The kit fits all Ducati's with external slave cylinder except for the Panigale. For pre-2000 Monsters a spacer is supplied.

The slave cylinder is milled from solid aluminium and hard-anodized, for a long-lasting colour. Available in red, black, gold and titanium, with a choice of 26mm, 28mm and 30mm diameters.

We strongly recommend not the install the 30mm variant on 900 and 916 engines (such as the Monster 900, the 748/916, SuperSport 750/900 pre-2000, etc.) as they can have problems with clutch engagement if the clutch is already a bit worn, the 28mm will do just fine on those models.

The part is a direct replacement for the OEM part, installation is very simple:
Squeeze the brake lever as close to the hand grip as you can and secure it with a tie-wrap, to prevent brake fluid from spilling from the reservoir. Make sure to catch any brake fluid that comes from the system when removing the kit. Loosen and remove all bolts securing the OEM clutch slave cylinder to the engine, as well as the banjo bolt securing the fluid line to the slave cylinder.
Pour some brake fluid into the CNC Racing clutch slave cylinder up to the lowest part of the thread. Now install the fluid line and banjo bolt, preferably with new copper washers. Remove the tie-wrap from the brake lever, and bleed the whole systeem.
NOTA BENE: only use Dot 4 brake fluid. Make sure you work in a clean environment, and take care to follow the procedure.
Brake fluid is very aggressive, avoid brake fluid from coming into contact with any parts of your body, and of the bike. Brake fluid can be flushed from the surface of your motorcycle with plenty water.

Product GroupDrukzuiger koppeling

AF28x Install

Installation guide for CNC Racing Clutch Slave Cylinder AF280 AF282 AF284

Documents / Installation Guide (169.46k)

AF282 Schematic View

Schematic view and article numbers for CNC Racing Clutch Slave Cylinder AF282 (28mm)

Documents / Installation Guide (77.38k)

AF284 Schematic View

Schematic View and Spare Part Numbers for CNC Racing Clutch Slave Cylinder AF284 (26mm)

Documents / Installation Guide (77.27k)

AF280 Schematic View

Schematic View and Spare Part Numbers for CNC Racing Clutch Slave Cylinder AF280 (30mm)

Documents / Installation Guide (77.49k)


Write a review

Clutch slave cylinder

Clutch slave cylinder

Clutch slave cylinder - available in black, red, gold and titanium - available diameters 26, 28 and 30mm


360 degree video of CNC Racing Clutch Slave Cylinder for Ducati

Customers who bought this product also bought:

30 other products in the same category: