Direct meer rijplezier met de EJK (Electronic Jet Kit) Gen 3 tuning module for Yamaha WR250 X - R 2008-2020
- Snel en eenvoudig te installeren – plug & play
- Voorgeprogrammeerd voor Stage 1-modificaties
- Geen laptop of software nodig
- Soepeler, krachtiger en responsiever motorkarakter
- Volledig instelbaar voor wie verder wil finetunen
De Electronic Jet Kit (EJK) voor EJK Electronic Jet Kit Gen 3 tune module for Yamaha WR250 X - R 2008-2020 is dé oplossing voor wie meer uit zijn motor wil halen zonder ingewikkelde software of dure dyno-sessies.
Dankzij plug & play aansluitingen is montage binnen enkele minuten geregeld. De module wordt geleverd met basisinstellingen voor Stage 1 (aftermarket uitlaat en luchtfilter), zodat je direct profiteert van een betere gasrespons en meer rijplezier.
Wie meer wil, kan eenvoudig finetunen via de overzichtelijke LED-zones (groen, geel, rood).
Less shop time means more ride time. The Electronic Jet Kit (EJK) is the No. 1 EFI controller on the market for installation time to riding with great performance. Plug and play does not just refer to connectors to make installation easy, but the EJK comes programmed and ready to go for stage 1 (after-market pipe and air cleaner) modifications. Forget downloading maps. Forget looking up settings. The EJK installs in mere minutes and you are off to a better, more powerful, smoother ride.
BASISINSTELLINGEN
|
View controller feature and setting descriptions |
| MODE: |
GREEN |
YELLOW |
RED |
|
|
|
#8 BLUE LED |
|
| FEATURES: |
GROEN BRANDSTOF |
GEEL BRANDSTOF |
ROOD BRANDSTOF |
GRN LWR SW PT |
YEL LWR SW PT |
RED LWR SW PT |
GEEN |
|
Athena Big Bore 290 kit with slip-on and air box top eliminated.
| |
GRN @ 5 |
YEL @ 4 |
RED @ 4 |
G/B @ 0.5 |
Y/B @ 4 |
R/B @ 4 |
|
|
Initial recommended base settings for stage 1 modifications and RIDING STYLE includes consistent elevations (+/- 2000 ft) and mostly off-road driving.
| |
GRN @ 3 |
YEL @ 2 |
RED @ 0.5 |
G/B @ 8 |
Y/B @ 4 |
R/B @ 4 |
|
|
Athena Big Bore 290 kit with slip-on and stock air box setup.
| |
GRN @ 5 |
YEL @ 3.5 |
RED @ 3 |
G/B @ 0.5 |
Y/B @ 4 |
R/B @ 4 |
|
|
Settings for stock exhaust and air box top eliminated.
| |
GRN @ 2 |
YEL @ 0.5 |
RED @ 0.5 |
G/B @ 8 |
Y/B @ 7 |
R/B @ 4 |
|
|
Alternate Stage 1 settings for FMF Q4, Stock header, air box flapper removed, and stock foam air filter.
| |
GRN @ 3 |
YEL @ 2.5 |
RED @ 0.5 |
G/B @ 4.5 |
Y/B @ 3.5 |
R/B @ 2 |
|
|
Recommended base settings for stage 1 modifications and RIDING STYLE includes a LARGE range of altitude changes (> 2500 ft) and/or high speed on-road driving.
| |
GRN @ 3 |
YEL @ 2.5 |
RED @ 0.5 |
G/B @ 4.5 |
Y/B @ 3.5 |
R/B @ 2 |
|
|
|
|
SPECIFIC TECH INFORMATION
|
View General Tech Information |
EXPERIENCING ANY HIGH-SPEED CUT-OUT - If you are experiencing any occassional bike cut-out when driving at high speeds then we recommend to make the following adjustments: Lower the YELLOW/BLUE setting to 3.5 and the RED/BLUE setting to 2.
This controller has a startup scrolling time of zero (0) seconds. You will NOT see any GREEN leds scroll back and forth like stated in our general instructions.
International customers - You will need to disconnect your O2 sensor if present to allow our EJK controller to freely add fuel during all cruising (GREEN) conditions.
The GREEN zone engages at 2900 rpm with a GREEN/BLUE setting of 8. |
|
Veelgestelde vragen (FAQ)
Hoe moeilijk is de installatie?
Dankzij plug & play connectors en de juiste basisinstellingen is de montage in enkele minuten klaar.
Moet ik zelf instellingen aanpassen?
Voor Stage 1-modificaties is dit niet nodig. Voor wie verder wil finetunen, zijn de zones eenvoudig te wijzigen.
Wat merk ik tijdens het rijden met de EJK Electronic Jet Kit Gen 3 tune module for Yamaha WR250 X - R 2008-2020?
Een soepelere gasaanname, krachtigere acceleratie en meer stabiliteit in elk toerengebied.
